• Different from traditional spiral wound reverse osmosis membrane, the water flow channel of open channel reverse osmosis membrane is open, and it will not form a tortuous flow channel like spiral wound membrane, which greatly reduces the concentration polarization effect and the risk of accumulation of pollutants on the membrane surface;

• The open channel design is easier to be fully contacted by the cleaning liquid, so that the inside of the membrane element can be more effectively cleaned, improving the cleaning efficiency;

• The open channel design and good water flow conditions can provide higher water flux, thereby improving the processing capacity of the entire system.

---Description

• The flow rate of a single membrane element may vary, but the variation range will not exceed +15%;

• The stable desalination rate generally needs to be tested after 24-48 hours of continuous operation, depending on the inlet water quality and operating conditions.

Maximum inlet temperature ································ 40℃

Maximum inlet flow rate ································ 8-12m³/h

Continuous operation pH range^b ······················ 2-11

Maximum pressure drop of a single membrane ···························· 15psi(0.1MPa)

Maximum inlet water SDI₁₅ ····························· 20

Free chlorine tolerance a ······························ <0.1ppm

Short-term cleaning pH range ························· 1-12

a. Under certain conditions, the inlet water contains free chlorine and other oxidants, which will cause serious membrane damage. Oxidative damage is not covered by the product warranty terms;

b. When pH>10, the continuous operation temperature does not exceed 35℃.