• Reduces operating costs and pressure requirements for pump systems;

• Maintains long-term stable high water volume under low operating pressure, improving the treatment efficiency of the entire water treatment system;

• Improves membrane layer structure and increases specific surface area, which can reduce energy consumption under the same water production demand, meeting the requirements of energy conservation and environmental protection;

• The membrane surface has been specially treated to enhance the ability to resist biological and chemical pollution and extend the service life of the membrane.

---Description

• The flow rate of a single membrane element may be different, but the range of variation will not exceed +15%;

• The stable desalination rate generally needs to be tested after 24-48 hours of continuous operation, depending on the inlet water quality and operating conditions.

Maximum operating pressure ································ 600psi(4.1Mpa)

Maximum water inlet flow ································ 17m³/h

Free chlorine tolerance a ······························ <0.1ppm

Maximum pressure drop of a single membrane ···························· 15psi(0.1Mpa)

Maximum water inlet temperature ································ 45℃

Maximum water inlet SDI₁₅ ····························· 5

Continuous operation pH range^b ······················ 2-11

Short-term cleaning pH range ························· 1-13

a. Under certain conditions, the presence of free chlorine and other oxidants in the influent water can cause severe membrane damage, which is not covered by the product warranty due to oxidation damage;

b. When pH>10, the continuous operation temperature shall not exceed 35℃.